Bonsai from beads and wire

For centuries, the Japanese have lived in an environment of beautiful scenery. This prompted them to create the corresponding landscapes in miniature. Bonsai from Japanese means a dwarf plant grown in a low pot or on a pallet. Bonsai was once a hobby of samurai, aristocrats and Buddhist clergy, but today it can be grown at home. With proper care, a bonsai can live longer than a person, but the cost of a young plant is from 100 euros. If you want a miniature bonsai tree to decorate your interior, make it from beads.

Do-it-yourself bonsai materials:

- beads;
- wire;
- threads;
- glue "Moment";
- alabaster;
- colored stones and other decorative elements.

Beaded bonsai master class

We make bonsai from beads and wire

2. Measure 45 cm of wire with a diameter of 0.35 mm. String 8 beads and twist them into a loop so that 2 free ends of the wire remain. Put 8 beads on the free end of the wire again and twist. As a result, there should be 8 loops on the wire.

4. Prepare 150 bud blanks.
5. Twist 3 buds together into one bundle. So do with all the blanks, you should get 50 bunches.
6. Let's start forming branches. Connect 3 bundles together and wrap them with thread - this is the top of the tree. Make two more of the same branches and attach them to the top a few millimeters below.

7. Now you need to make another branch. To do this, connect 2 bundles and attach a 12 cm long wire to them. Wrap these bundles with threads. Connect more bundles and make branches from the main branch.
8. Make a branch with 5 branches and wrap it with thread too.

9. When all the branches are ready, you need to connect them into a tree. To do this, take a wire 3 mm thick and gradually attach the branches obtained in paragraph 6, paragraph 7 and paragraph 8.
10. Wrap the entire barrel with thread, and bend the end of the wire.
11. The basis for bonsai must be made from a mixture of alabaster and water. Pour the solution into the mold and wait for it to dry.
12. Lubricate the trunk and branches with a mixture of alabaster and glue and then make small grooves with a toothpick.
13. Paint the trunk and branches with brown acrylic paint.

Becoming a bonsai master, you can create images of powerful thousand-year-old trees, form landscapes of a dense forest - and all this on a tiny piece of land.

We hope our master class beaded bonsai you liked it, and you can easily make the same small tree that will be good for loved ones.

Bonsai is a magnificent combination of nature created with human creativity. Dwarf trees, which differ from their forest and fruit relatives only in size, will be a great decoration for your home. However, such plants are very expensive, not everyone can afford a dwarf garden in their apartment. In the master class, we will try to copy this incredible creation - weave a bonsai tree from beads.

How to weave a beaded bonsai?

In order to weave a beaded bonsai tree, here's what we need:

• 200 g of plain green beads, preferably dark;
• 50 g of beads of other shades of green (darker or lighter - it doesn’t matter, the main thing is a beautiful combination);
• copper wire with a diameter of 0.3 mm;
• aluminum wire with a diameter of 2-3 mm;
• floss threads - one skein of brown and green;
• medical adhesive plaster - 2-3 skeins;
• one package of ordinary gypsum (enough for several trees);
• gouache paint brown and black;
• colorless varnish;
• tree pot.

Now we can start weaving a bonsai tree from beads.

Master class on weaving bonsai from beads:

1. Next, we begin to plant beads. We do not cut the wire, we make a beaded ribbon 50-60 cm long.

2. Now we make a leaf out of the ribbon: we count 7 beads from the edge, move them aside and twist them into a loop.

3. So we make 8 leaves from our tape, we maintain the distance between them no more than 1 mm.

4. Then we twist the ends of the wire, and bend the leaves to the top, and our first branch of beads for the bonsai tree is ready.

5. We continue to weave exactly the same branches until all our beads run out, as a result, they should turn out to be about 250-300 pieces.

6. Next, we take three branches, put them together, twist and grind with a layer of floss threads.
7. After all the branches are collected in threes, we proceed to the manufacture of branches of the second, third and, finally, fourth order. Let's focus on the photo.
8. Now we begin to collect our beaded bonsai. We take a thick wire and make a frame for a tree trunk. We get a structure with a height of 30-35 cm. We weave 4 thick branches into the frame (there should be no more than four, you can even take three).

9. For reliability, we wrap the branches with adhesive tape.

10. Next, we continue to attach the branches to the frame, wrapping them with a plaster, from the largest to the smallest. For convenience, we fix the tree in a pot with plaster.

11. After the tree is fixed, we begin to process its trunk with gypsum - we apply it in a thin layer along all the branches of the tree. We work extremely carefully so as not to stain the beads - gypsum dries very quickly, and it will be very difficult to clean the beads.
12. Now let's start painting. We paint the tree trunk and branches with brown gouache, paint over everything tightly - there should not be white spots.
13. Then, using a thin brush, we apply subtle vertical strokes along the entire trunk of the beaded bonsai tree to give it a more realistic look.

14. Let's start decorating the soil in a pot. Here you can give absolute freedom to fantasy: pebbles, decorative grass, flowers woven from beads - everything is perfect for decoration as well as possible.

15. Now, for even greater shine of the tree and the reliability of the paint layer on the tree trunk, cover it with a layer of transparent varnish. Also, at the same time, we varnish the soil in the pot.

Our beaded bonsai tree is ready! Let's put it on the Saami a place of honor in the house and enjoy the result of painstaking work.

The art of Bonsai (growing miniature copies of trees) has been very popular all over the world for many decades. Gardeners with great love and diligence work to create, in the literal sense, masterpiece creations of ideal forms.

A real bonsai is a living tree (ficus, pine, sakura or maple) or a miniature composition of a piece of forest, in fact it is a copy on a very small scale, which needs constant care and control.

Creative and creative people did not lose sight of this moment, throwing efforts to create the same compositions, but only using beads. All the splendor of beaded bonsai can be seen in the photo, and believe me, this will not leave you indifferent.

Creating a bonsai is not an easy task, as this work requires painstaking and diligence, but the result will be amazing and will delight you for many years without requiring special care.

Necessary materials

Having picked up a variant of your future creation, you need to prepare the necessary tools and materials for work. In addition, you can not do without a step-by-step instruction for making a bonsai tree with a detailed description of the steps.

First of all, prepare the necessary materials and tools: multi-colored beads, special wire (thin and thick), thread for braiding the trunk and branches, plaster or alabaster mortar (to create a reliable support), acrylic paint, a container of the desired shape, decorative elements, glue moment, cellophane film, wire cutters, brush and gloves to protect hands.

Beaded branches for bonsai

The base or frame of any bonsai is made of wire, which is tightly wrapped around the top with a thread or pasted over with tape. The stability of the structure is provided by a container filled with a hardened gypsum mixture.

Thin leaves and bonsai inflorescences are woven from glass beads, the color of which depends on the type of tree. For example, various shades of green are suitable for pine trees, yellow and red tones are inherent in maple trees, pinkish colors lead in sakura, white and pink notes in chestnut flowers, and brown and gold tones in Russian birch earrings.

However, for each species, use a leaf weaving scheme specific only to them, and the method of creating a tree as a whole is common to all.

Those who for the first time decided to make beaded bonsai with their own hands should first use simple weaving patterns for beginners.

The looped method of weaving branches is the simplest, but is suitable for creating a luxurious crown of a tree, and is suitable for beginners.

In addition, it would not be superfluous to visit a beaded bonsai master class or view it on the Internet, from where you can learn the basics of creation and techniques:

• prepare a thin wire 45 cm long and string 8 beads on it,
• move the beads to the center and fix in the form of a loop,
• repeat several times, while making a loop of wire from each row of beads,
• there should be 6-10 loops on the branch, and the remaining wire is leveled and shortened in length by 10 cm,
• as a result, the top is lush, due to the connection and twisting of the ends.

In total, the composition should have 50-200 miniature branches, in which parts of the tree are joined together (branches, shoots, twigs).

Do not forget about the formation of the tops of the branches that each of them has. To do this, you need to twist three blanks together, and then add the remaining elements to them.

In order for the resulting frames to take on a more believable and aesthetic appearance, you need to wrap them with a special tape or strong threads, this will smooth out the relief outlines and make the branches more elastic.

In addition, in the process of creating branches, you can pay attention to the shape of knots, bends and straightening of the leaves. Each branch needs to be given special attention so that it comes to life and plays with color in the sun. How to make bonsai branches correctly, the instructions will tell in more detail.

The formation of the trunk and the tree as a whole

Naturally, the process of forming a bonsai starts from the top from the very top, gradually expanding the trunk to the roots, so that the structure is strong and stable. In addition, a thick wire is woven into a thin wire, which will give the trunk a more natural look and make it stronger. From above, the wire is covered with masking tape or floral tape (tape).

The finished product is fixed in the prepared stand using a plaster or alabaster solution. But first wrap the tree with cellophane.

To give naturalness to the trunk, its surface can also be treated with a gypsum (alabaster) mixture. Then let the product dry.

At the end, the tree is painted and decorated. Acrylic paint and varnish are used for coloring. As suitable flowers from beads, glass, artificial and natural stones, cardboard houses, miniature copies of birds and animals.

As you can see, making a beaded bonsai tree is not difficult at all. Try it and you will definitely succeed. Good luck!

Photo bonsai from beads

Such a small artificial tree will perfectly decorate the interior of the apartment, adding a little "live" green colors. This beaded bonsai is called "Thoughtful Snake". Why? Read the master class and find out everything.

You will need:

• Green beads of different shades (approximately 80 g);
• Threads;
• Wire 0.35 mm, 1 mm, 3 mm;
• Alabaster;
• Paints.

Bonsai from beads. Weaving pattern

On the wire 0.35 without taking it off the coil, we collect more beads, weave 8 loops of 8 beads.

We twist.

Then we cut the wire. We leave 10 cm for the ends. Exactly 150 pieces of such miniature bundles need to be made, twisting after three small bundles one large bundle.

The result is 50 bunches.

Let's move on to the branches of our bonsai. For the top, you need to make 2 branches, which will be called branches of the first order (1p). First, we connect 3 bundles together and wrap 1.5-2 cm of thread (the base of the branch).

After we connect together 2 more bundles 2 times, wrap it with a thread and connect it to the main branch. The branch of the first order turned out. Let's do another one.

We pass to the branches of the second order. We connect two bundles, fix a piece (12 cm) of 1 mm wire, wrap it with a thread, after which we attach 2 bundles 3 more times.

The branch of the second order turned out. 2 such branches are required. We make branches of the third order in the same way as branches 2p, only we attach 2 bunches 4 times to the bases.

Assembly

Now you need to collect all the branches and form a beaded bonsai. We connect branches 1p together and wind them to 3 mm wire.
After that, in turn, we attach branches 2p and branches 3p, arching the trunk.

We twist the bottom of the wire.

Let's dry.

We paint with paint. I used gouache diluted with PVA glue. When the paint was dry, I painted a little bronze with a dry stiff brush. You can do as your imagination tells you. I attached a pebble and applied a snake (which determined the name of the craft).

Here is such a beaded bonsai as a result. The height of the finished product is 25 cm. I hope this master class will help you make your own unique tree.

Based on materials from the site: planetadpuzei.ru

Miniature bonsai trees are the creations of skillful hands of gardeners who have devoted decades to maintaining their ideal shape. Creating a beaded bonsai requires the same painstaking work, but the effect of such an interior decoration is no less!

Being quite small, a real bonsai replicates a tree or a whole forest area in nature. At the same time, maple, pine or sakura remain living plants that require constant attention and care. A tree woven from beads remains invariably beautiful day after day, striking with the play of light on tiny glass beads.

What is required for beaded bonsai?

Having chosen a tree to your liking, stocked up with patience and everything necessary for work, you can weave a bonsai from beads with your own hands. Although this kind of hobby cannot be called simple, with a detailed diagram and guidance, even with a little experience, you can cope with the work and decorate the house with an original thing.

For work you need to stock up:

• beads of different shades;
• thin wire for stringing beads;
• thick wire in insulation for the frame of large branches and trunk;
• a strong thread or a special ribbon for floristry, which will be braided around the frame;
• alabaster or gypsum mixture for casting the support and fixing the beaded bonsai trunk;
• acrylic paint;
• suitable pot;
• all kinds of decorative elements that will give the decoration a naturalistic look.

Cellophane film will be required as an auxiliary material, and universal instant glue will help to fix the decor.

Tools included: wire cutters, brush and gloves to protect hands while working with plaster. An important help for the master is the scheme of weaving bonsai from beads.

Weaving bonsai branches from beads

The frame of a man-made bonsai consists of wire wrapped tightly with thread or adhesive tape. The tree is mounted on a heavy plaster stand.

Only the thinnest parts are woven from glass beads - leaves, as well as inflorescences, if you have to make a flowering bonsai from beads.

The palette of beads depends on the choice of the type of tree:

1. Pine will require different shades of green.
2. Maple foliage plays with red, orange and yellow colors.
3. In the crown of cherry blossoms, pink tones predominate.
4. On chestnuts, in addition to lush greenery, white-pink tassels should bloom from beads.
5. Birch branches are fresh light greens and golden brown catkins.

Each type of bonsai leaf has its own bead weaving pattern, but the approach to assembling branches and the entire tree is common.

For beginners, it is easiest to use the looped method of creating branches, which is quite suitable for simulating a lush crown. Designed for those who first took up the assembly of beaded bonsai, the master class will help you master the basic techniques and master the general technique:

Depending on the tree chosen for the beaded bonsai, you will need to make from 50 to 200 small branches. Of these, twisting the wire parts with each other, create larger branches, shoots and branches.

When collecting branches, you need to remember that each of them has a top. Therefore, work begins with twisting three small blanks. Then other fragments are added to them.

Twisted wire frames with beaded bundles at the tops still bear little resemblance to real branches, so they are tightly wrapped with a strong thread or floral tape, which will additionally fasten the structure and smooth out the relief. In parallel, the desired shape is given to the branches, bends are made, “beaded leaves” are straightened. The work is repeated on all branches.

Assembly and installation of a beaded bonsai tree

How to weave bonsai from beads is already clear. But how do you piece together the individual branches and turn them into a miniature tree?

The assembly starts from the top, remembering that the trunk expands towards the base, becomes more powerful and stronger. Thicker wire is gradually added to the wire structure. She will not only make the beaded bonsai more reliable, but also strengthen it. Bonsai are wrapped over the wire with the same floral tape or narrow masking tape if the tape is not at hand.

When the tree is assembled, it is given the intended shape, it's time to install the trunk on a stand made of plaster or alabaster. At this stage, you will need the pot chosen for the beaded bonsai. The tree is covered with cellophane film and, having straightened the wire ends in different directions, the bonsai itself is placed in the bowl.

The composition is carefully poured with a solution of gypsum or alabaster. The same composition can process the trunk. This technique allows you to perfectly imitate the bark, create irregularities and traces of stumps on the surface.

The completed composition is left for about a day until the mixture is completely dry. The DIY beaded bonsai is completely dry, and it's time to start painting and decorating it.

When growing real live bonsai, stones are often used. You can imitate a piece of rock using foam or sequentially folded pieces of drywall, glued together and treated with a thick gypsum-based paste. On such a layered "rock" it is convenient to lay out the roots of twisted wire, made in the same way as the branches.

The beaded bonsai trunk is covered with acrylic paint, which is also required to paint the gypsum base in the color of soil or grass. The stand is decorated with:

• flowers woven from beads;
• individual beads and small pebbles;
• glass, perfectly reproducing the view of the reservoir;
• figures of people, animals and birds;
• decorative buildings.

So that the beaded bonsai is not afraid of time and sunlight, the composition is covered with a colorless acrylic varnish. Where the tree is painted, this treatment is carried out twice, after the initial layer has completely dried.

Beaded bonsai photo: an inexhaustible source of fantasy

Man-made trees are bright interior decorations, which, even when using the same beaded bonsai weaving pattern, always turn out to be unique. It is even more interesting to create copies of different tree species. Such a garden will not leave indifferent even a person far from gardening and needlework!

The pink beaded bonsai shown in the photo looks as touching and gentle as real cherry blossoms.

Bright play of autumn colors is a tree imitating Japanese maple.

The mountain pine, woven from green beads, even has tiny cones. Bonsai reproduces the appearance of a tree, against all the forces of nature that have grown on the edge of a cliff.

Blooming bonsai made of beads in the form of wisteria looks incredibly magnificent and decorative in the interior.

Caring for a beaded bonsai is not difficult at all. It is enough to regularly remove dust and, if the composition does not contain elements that are afraid of water, occasionally carry out gentle wet cleaning.

Beaded bonsai master class - video