Generators that are capable of generating electricity without the use of gasoline or diesel fuel are becoming increasingly popular, as they are much more economical. Also, these devices do not emit toxic substances and do not pollute the environment. Magnetic generators that operate without fuel are used not only in households, but also in some industries.

Many states are now focusing on the development of alternative energy sources, as well as on saving mineral resources. This is achieved through the use of magnetic electric generators. The principle of their operation lies in the elementary laws of physics. The most successful types of devices are considered to be:

Most types of units can be successfully used in various industries. This will not only save on fuel, but also reduce the level of environmental pollution.

Vega device and its features

BTGs operate according to the scheme of capturing free energy, after which it is converted into an induction current. Adams and Bedini devoted their lives to studying this physical phenomenon. The devices can be used as an autonomous power supply for:

• private houses;
• farm or forest land;
• shipping;
• automotive industry;
• aircraft manufacturing and astronautics.

The effectiveness of fuel-free magnetic generators often manifests itself in places that cannot be supplied with fuel, and the strength of natural energy is not enough to fully provide electricity. It should be understood that Adams' device is not an eternal generator of electricity. During operation, it requires periodic repairs. The unit also requires constant maintenance.

The fuel-free magnetic generator from the manufacturer “Vega” has a number of advantages:

1. The device can be used in any weather conditions, as well as away from power supply networks.
2. The fuel is kinetic energy.
3. There are no restrictions on electricity production.
4. Completely safe for the human body and nature.
5. You can make a fuel-free generator with your own hands.
6. The unit is very compact.
7. The minimum service life is 20 years.

The main advantage is that you do not need to move the shaft yourself. The entire process is automated, thanks to the conversion of kinetic energy into electrical impulse.

Principle of operation

The operation of the generator is hybrid in the system. Alternating current is obtained after converting kinetic energy. The rotor rotates due to the force of the magnetic field that comes from the ends of the electromagnets. Thus, magnetic vibrations make it possible to create an electrical impulse. The most simple design contains:

The main element in the design is a multi-pole direct rotation generator. There are magnets on the outside. Their number depends on the required power. The minimum efficiency of such a device is 90%. From generators, you can create electrical networks by connecting several devices to each other. This is beneficial if the power of the device is, for example, 5 kilowatts, but the required power is 10 kilowatts.

Creating a device with your own hands

Obtaining electrical energy in huge quantities without consuming fuel is a tempting and quite feasible idea. The creation of such a device can be considered using the example of the Adams generator. For self-assembly you will need:

First, the magnet must be secured to the base of the coil. This can be done by drilling a hole in it and then securing it with bolts. The wires on the coils should be 1.25 mm thick and have a layer of insulation. The coils should be mounted on a metal frame so that there are small gaps between the ends. This is required for free rotation of the main element.

At this stage, the device can already be used. It is quite simple to check the correct assembly: you should manually turn the magnets. If the structure is assembled correctly, voltage will arise at the ends of the winding.

This is the most primitive generator, powered by magnets. But based on such a scheme, it is possible to create a device that will be able to provide electricity to the entire house. You can also purchase ready-made devices from trusted manufacturers.

Most popular models

Currently, the most popular generators are models from manufacturers Energistem, U-Polemag, Vega, and Verano-Co. They occupy a large part of the device market.

Vega produces devices that operate on the principle of magnetic induction. This idea was realized by the famous physicist Adams. The price often depends on the power and size of the device. Minimum cost is 45 thousand rubles. This manufacturer has a number of advantages:

1. Products from the Vega company are very environmentally friendly.
2. The generators are completely silent, which allows them to be installed anywhere.
3. The devices are relatively compact.
4. The manufacturer has quite a few models, the power of which starts from 1.5 kW and reaches up to 10 kW.

The minimum service life is 20 years. Batteries must be replaced every 3-4 years.

"Verano-Co" is a Ukrainian manufacturer that uses only high-quality components for its products. It produces generators for both domestic and industrial purposes. The operating principle of the alternative energy source is the same as that of other magnetic units. The cheapest model costs 50 thousand rubles. Prices for devices reach 200 thousand rubles.

U-Polemag is a Chinese manufacturer. Represents the largest variety of generator models. The standard efficiency of the devices is 93%. Maximum energy loss - 1%. Often purchased for household use. It has compact dimensions, low noise level and light weight. The package includes cooling systems. The maximum duration of use reaches 15 years. Prices for the model range start from 30 thousand rubles. and reach 90 thousand rubles.

Energizistem produces vertical devices. Consumers do not have a clear opinion about the quality and power of devices. Prices for generators are a little high and start at 50 thousand rubles.

Any such devices (especially magnetic generators) cost quite a lot. Often, consumers want to buy a high-quality model, but at the same time spend a minimal amount of money. Recently, people have started purchasing goods from China. This is due to the fact that the products are cheap and have quite tolerable quality. Generators or structural elements can be purchased abroad, but there are certain risks that should be taken into account:

1. You have to pay for the product before receiving it.
2. It often happens that products do not correspond to the description on the website.
3. Sometimes the package does not reach the recipient, and no one will return the money.

Often such savings turn out to be false. It is possible to purchase a generator directly from the manufacturer. But with this option, you need to know all the intricacies of the device’s design so that an experienced seller cannot “sell in” a generator that does not meet the requirements, so before purchasing you should:

1. Thoroughly study the market for such devices. This will allow you to discover leaders among manufacturers.
2. Correctly calculate the power. This way you can save money without overpaying for unnecessary features.

It is advisable to make sure that a warranty card is issued for the product. Each model must have a test sheet which can confirm the quality.

You can make a generator that is powered by daylight. This is an excellent analogue of a solar panel, but the main advantage of such a generator is a minimum of materials, low cost and ease of assembly. Of course, such a generator will produce much less energy than a solar panel, but you can make a lot of them and thus get a good flow of free energy.

Nikola Tesla believed that the whole world is energy, so to receive and use it, you just need to assemble a device that could capture this free energy. He had many different projects for “fuel-free” generators. One of them, which today everyone can do with their own hands, will be discussed below.

The principle of operation of the device is that it uses the energy of the earth as a source of negative electrons, and the energy of the sun (or any other light source) as a source of positive electrons. As a result, a potential difference appears, which forms an electric current.
In total, the system has two electrodes, one is grounded, and the other is placed on the surface and captures energy sources (light sources). A large capacitor acts as a storage element. However, these days the capacitor can be replaced with a lithium-ion battery, connecting it through a diode so that the opposite effect does not occur.

Materials and tools for making a generator:
- foil;
- a sheet of cardboard or plywood;
- wires;
- high-capacity capacitor with high operating voltage (160-400 V);
- resistor (not required).

Manufacturing process:

Step one. Making grounding
First you need to make a good grounding. If the homemade product will be used in a country house or village, then you can drive a metal pin deeper into the ground, this will be grounding. You can also connect to existing metal structures that go into the ground.

If you use such a generator in an apartment, then here you can use water and water supplies as grounding. gas pipes. All modern sockets also have a ground connection; you can also connect to this contact.

Step two. Making a positive electron receiver
Now we need to make a receiver that could capture those free, positively charged particles that are produced along with the light source. Such a source can be not only the sun, but also already working lamps, various lamps, and the like. According to the author, the generator produces energy even in daylight in cloudy weather.

The receiver consists of a piece of foil, which is mounted on a sheet of plywood or cardboard. When light particles “bombard” an aluminum sheet, currents are formed in it. The larger the foil area, the more energy the generator will produce. To increase the power of the generator, several such receivers can be built and then all of them connected in parallel.

Step three. Connecting the circuit
At the next stage, you need to connect both contacts to each other, this is done through a capacitor. If you take an electrolytic capacitor, it is polar and has a designation on the body. The ground must be connected to the negative contact, and the wire going to the foil to the positive contact. Immediately after this, the capacitor will begin to charge and electricity can then be removed from it. If the generator turns out to be too powerful, the capacitor may explode from an excess of energy; therefore, a limiting resistor is included in the circuit. The more charged a capacitor is, the more it will resist further charging.

As for a conventional ceramic capacitor, their polarity does not matter.

Among other things, you can try to connect such a system not through a capacitor, but through a lithium battery, then it will be possible to accumulate much more energy.

That's all, the generator is ready. You can take a multimeter and check what voltage is already in the capacitor. If it is high enough, you can try connecting a small LED. Such a generator can be used for various projects, for example, for autonomous LED night lighting lamps.

In principle, instead of foil, you can use other materials, for example, copper or aluminum sheets. If someone in a private house has a roof made of aluminum (and there are many of them), then you can try to connect to it and see how much energy will be generated. It would also be a good idea to check whether such a generator can generate energy if the roof is metal. Unfortunately, no figures were presented that would show the current strength in relation to the area of ​​the receiving contact.

Many people are now starting to leave cities for nature. And often they have a problem with electricity. They begin to look for alternative sources of electricity and most of them turn out to be solar panels(especially since their characteristics have now significantly improved). There are many videos on the Internet today with magnetic fuel-free generators and many people want to have them.

Meanwhile, an enterprise has already appeared in Russia that has launched tact generators into mass production and their price is quite reasonable.

Now the company already sells many models of fuel-free single-phase generators from 1 to 100 kW at 220 volts at different prices. Acceptable noise level is 40 dB. with overload protection and zero sine wave distortion. The generator is started from batteries. The analysis showed that such a generator pays for itself in 2 years. The declared service life of this device is 10 years. As I understand it, during this period it is possible to repair the electric motor (bearings will have to be changed at least once every few years), replace some radio components, repair the rotor, etc. That is. In case of problems, the cost of repairs is not significant and is quickly recouped.

If fuel-free generators are magnetic, as the manufacturer claims, then the magnets tend to demagnetize and after 15 years they will have to be changed, and maybe earlier. Magnets are most likely the most expensive element in a generator. Perhaps this is why the stated service life of the device is 10 years.

All this is very good and may this enterprise develop successfully. After all, this could radically change the economy. Now you can abandon power lines, heating mains and not depend on public utilities. Free heating of the house and year-round greenhouses is now becoming possible. This company has been operating for several years. However, for some reason there are no reviews on the Internet about the plant’s products on third-party sites. Why? After all, this is a revolution in science and hundreds of people should purchase such generators. We provide a link to the website of the manufacturer of fuel-free generators - ( link removed, read on). Watch, study. We will be glad to receive information on this topic in the comments.

Attention!!! According to the latest information, this enterprise is fraudulent. They take money in advance, but do not ship the goods. Be careful! Read the comments below and if you have something to say, leave a comment. People will be grateful to you.

Update from 02.14.16

A video with a homemade similar fuel-free generator was found on YouTube. The author's video has been deleted; it is a re-uploaded video from another person.

Sall S.A. — Why aren’t fuel-free generators introduced?

Update from 12/21/16

Several people have already sent money for the purchase of generators, and that’s all. Nobody sent any generator. Don't fall for scammers' tricks . Although there were many warnings in the comments.

The rise in prices for fuel resources outlined the main direction for the development of energy-saving technologies and, as always, led to a lot of speculation. Today, the number of views on the Internet is dominated by videos on the topic of fuel-free generators (FTG), as well as how to make them yourself. In addition, a diagram is often provided. These devices supposedly generate electricity at no cost. Based on the law of conservation of energy, such generators are impossible in principle, but today they are offered for sale in a wide variety.

BTG device and refutation of its functionality

Energy cannot appear out of nowhere and disappear into nowhere. It only passes from one state to another - this is a scientific fact. Therefore, we will consider all possible options for BTG only from a scientific point of view.

Permanent magnet generator

The rotation of the rotor in such generators is based on the interaction of the magnetic field of permanent magnets. They can be divided into 2 types - mechanical and electronic. In both options, a disk or shaft is used as a rotor, on which permanent magnets are attached in a circle.

In the mechanical version, the rotor is also untwisted by permanent magnets, which at the right moment approach the rotor and when necessary move away. The rotation of the rotor is transmitted to the distributor, similar to the cam shaft in an internal combustion engine. When the magnet on the disc/shaft aligns with the pusher magnet, an approach occurs and the unipolar magnetic field of the pusher magnet repels the magnet on the rotor, causing it to rotate. After this, the pushing magnet moves away from the rotor, allowing it to turn with the next magnet towards

In electronic versions, the rotor is spun by electromagnets. There are coils around the disk - two of which are pushing, and 3 of which are working (generating electricity). The operating principle of such models is based on the pulsed operation of pushing coils. The pushing coils are powered by induced electrical energy in the working coils. That is, the resulting electricity is spent on rotating the rotor. Again, applying the law of conservation of energy, we can say that rotation is only possible at idle. Once you connect the load, the generator will continue to operate only until the inertia of the rotor has completely died out.

In practice, experimental permanent magnet installations were able to achieve only 7% efficiency. Despite the fact that scammers selling them on the Internet claim 97-98% efficiency and 10 kW of power. The price of such devices sometimes reaches 80 thousand rubles. But in reality, such an installation is capable of lighting up a small LED at most.

Hydraulic installations

Such systems are even more stupid. Taking advantage of the ignorance of users, some “inventors” are trying to convince the audience that it is possible to generate electricity by pumping liquid through a turbine, which is connected by a common shaft to a generator. In other words, according to them, the energy received is enough to operate the pump and there is still some left over. The question – where does this mysterious additional energy come from, as usual, is kept silent.

Electricity from the ground

You can find quite a few videos on the Internet that clearly show how you can get electricity from the ground. It’s interesting - those who shoot these videos know something about the electrical potential of metals or use something that the audience does not know. In fact, the process has long been studied and even used in practice. For example, tread protection against corrosion of underground steel structures is based on potential differences.

It is enough to carry out a simple experiment - stick two pins into the ground: one made of aluminum and the other made of copper. If you take a measurement in measurement mode DC voltage between these electrodes, the device will indicate the presence of some voltage. Moreover, even when using electrodes from the same metal, their electrical potential will differ by hundredths of a volt.

It is quite possible to use such an installation to power low-power consumers, for example, for diode lighting of a yard or a private house. The main thing is to calculate the required surface area of ​​the electrodes that are driven into the ground. In this case, the anode electrodes will be subject to increased electrochemical corrosion and will last for a maximum of a year. Considering the price of copper and aluminum, and you will need a lot of such electrodes, this method is not economically feasible.

Tesla Generator

Perhaps this is the most attractive idea today. Theoretically, everything agrees here even with the law of conservation of energy. According to the scientist, there is a certain ether from which energy can be obtained. Everything seems to be clear - there is a source of energy, which means it can be transformed. The only catch is that this very ether has not yet been discovered and it exists only in theory.

Unfortunately, Tesla destroyed his developments in this direction. Whether they existed at all remains a controversial issue. To date, multiple experiments have not been successful, but the number of speculations and falsified videos is increasing many times over.

There is no need to rush to refute the existence of the ether and the possibility of obtaining electricity from it, because many great scientific discoveries were originally predicted in theory.

Torsion generator

A generator of this type exists only in theory and is based on the use of a hypothetical physical field. The existence of torsion fields has no scientific confirmation, and the theory itself dates back to 1922. Nevertheless, the hypothesis is being seriously considered by a number of scientists.

DIY BTG

Is it possible to assemble fuel-free generators with your own hands? Of course, they just won’t work. Currently, there are many schemes on the Internet on how to make BTG and sometimes, to put it mildly, “senile”. Why is this being done? It’s simple, those who understand electronics, and there are not many of them, will understand that this is a fake. For most, an intricate scheme with incomprehensible explanations inspires confidence. Hence the potential buyers of “scrap metal” for big money.

Free electricity

This is not BTG, but the method is quite real and legal. The technique is relevant for the private sector and holiday villages, where the transformer substation is often overloaded during peak hours.

To begin with, a simple measurement is made. A temporary grounding electrode is installed. The soil in this place can be moistened. Connect the multimeter in measurement mode AC voltage to the ground pin and neutral contact in the socket. Measurements must be made during peak hours of electricity consumption. If there is at least a couple of volts between ground and zero, then free electricity is quite possible.

In this circuit, the voltage must be stabilized and raised using a transformer to 14 V, and then rectified using a diode bridge. Thus, during hours when the network is overloaded, you can remove the residual voltage from zero and charge the battery with it, and at night, use the accumulated energy for diode lighting.

Fuel-free generators electricity (BTG) for home and car. Ready-made devices, as well as instructions for self-assembly, intended for mid-level specialists.

There are two types of electricity in nature. One type is familiar to us - electric current. The second type is also familiar to us, but people confuse it with the first. This is static. Statics has little in common with ordinary current and does not obey the well-known laws of Ohm and Kirchhoff. For statics, there is no EMF and no potential difference between which the classical Ampere current flows. At the same time, static is easily converted into the electricity we are familiar with.

The generation of free energy is based on the interaction of statics and classical current. There is no unknown energy from the ether, there are clear material processes, which, nevertheless, you will not read about in more than one textbook. All fuel-free generators operate in accordance with known physical laws, including in full compliance with the Law of Conservation of Energy. The difficulty of creating a free energy generator is due to modern physical dogmas and stereotypes.

All instructions for assembling a fuel-free generator offered on the site include detailed description operating principle and practical diagram. Free consultations are provided during assembly.

Fuel-free generators- this is a special class of sources energy which many people know that they exist, but few have ever seen them. Fuel-free(fuelless) generator- BTG is something that does not fit well into modern stereotypes and therefore unnerves some people, while attracting others like everything unknown. It is believed that BTGs cannot exist in principle, since it is impossible to receive energy out of nothing. After all, energy cannot be obtained just like that, it only passes from one type to another. We burned the wood and got heat, and there was no other way. But whoever thinks so has succumbed to the tricks of education and does not want to live with his own head. The overwhelming majority of people really prefer to live within the framework of dogmas instilled by schools and institutions, which is natural for a person. And the further it goes, the worse it gets.

If you need new developments free energy generators and their diagrams, you will find them on this site. But before you try to get energy from the air, you need to understand very clearly: it’s not so simple free generator energy, I think. Fuel-free generator (BTG, generator of free energy, energy from the ether, etc.) - a device that generates electricity without consuming fuel. Currently, there is quite a lot of practical interest in BTG, apparently associated with the steady decline in the incomes of citizens, as a result of those who dream of getting rid of the burden of utility bills. Scientists fuel-free They are not interested in generators and never have been. Moreover, mentioning BTG in academic circles is considered a sign of bad taste, due to the fundamental academic opinion that it is impossible to get more than what is spent.

This fuel-free generator(BTG) the simplest of possible options. Generator has no scarce parts and does not require grounding. Assembly does not require much experience. An excellent option for a power source for heating devices for the home. The generator uses a microwave oven transformer (MOT) and a rotating mini-fan spark gap. If you decide to build a generator free energy and don’t know where to start, this diagram and description of the operating principle is for you. The power of the generator is determined by the design dimensions and can vary from several hundred watts to several kilowatts. Due to the great interest in devices free energy, We warn you: BTG is not something that can be assembled thoughtlessly, like an ordinary circuit, even if the circuit seems simple.

Vertical sail-blade silent wind generator(windmill) for light to moderate winds. Wind generator It has small dimensions and can even be installed on a balcony, and in a horizontal position. A generator is very useful during rolling blackouts, which is the norm in some cities. In regions with weak winds, the use of conventional bladed wind generators is excluded, since they operate on the principle of a streamlined profile. Due to the low Reynolds number, small blades flow poorly at low wind speeds, turbulence occurs and the efficiency of the generator sharply decreases. In weak winds, sailing wind generators are used, but they are large, require the use of multipliers and cannot withstand strong wind gusts. The proposed generator does not have the disadvantages of sailing analogues.

Free Energy Generators(BTG) Tariel Kapanadze is an excellent example of the seemingly impossible. Output power demonstrated by the author generators(more than 10 various designs) ranges from 200 W to 5 kW. Voltage 240 Volt 50 Hz. Starting is carried out from the battery, after which the battery is disconnected, and the generator operates in autonomous mode for an unlimited time. Kapanadze has been keeping his technological secrets for many years and trying to find investors. At the same time, thousands of enthusiasts around the world are trying to replicate generators based on original videos. Few people succeed. We bring to your attention a manual for self-assembly of the generator. The generator showed stable operation at a load of 2 kW (electric heater). The scheme is absolutely working, and failures with installation replication are entirely due to a lack of understanding of the operating principle.

Donald Smith is one of the brands in the field free energy, second in popularity perhaps only to Nikola Tesla. At the same time, Smith has only one design fuel-free generator while Tariel Kapanadze makes BTG as if he were baking pies. But the question, of course, is not about popularity, but about the possibility of repeating a particular device. It’s hard to say how many people tried to repeat Smith, but a lot. The design is extremely simple: spark generator the wave resonator oscillates. But then 100,500 questions arise on the topic of what diodes do in the circuit, how they can even straighten the RF, and where exactly the additional energy comes from in the generator energy, and even in considerable quantities 1-10 kW or even more. The topic of the Smith generator was widely discussed on various forums. Smith himself explained a lot as well, but apparently explained it poorly. That was the end of it.

Generator Steven Mark's TPU stands out from the rest fuel-free generators an original approach to the design of BTG. This generator does not contain RF resonators. The working part of the TPU is a metal ring about 20 cm in diameter, with coils of thick stranded wire attached to it. Mark repeatedly demonstrated his generator in public, made presentations in search of investors, but then disappeared from view, which in the United States is more the rule than the exception. One can only guess where the inventor disappeared. At best, the development was kept secret. Mark had several followers who managed to get good results. One of them is Otto Ronette. Otto's design is somewhat different - it consists of two plastic rings with a thick pair of wires attached to them. The wires between the rings are connected crosswise.

Do you have an idea to buy BTG? Great idea! But BTG - fuel-free generator- this is something that cannot be bought in a store. In stores they sell Chinese ones under the guise of BTG. gas generators. The diagnosis “you can buy everything” has become so absorbed into modern man that it can no longer be cured. And therefore, under the guise fuel-free They sell generators to buyers, whatever they want, but not BTG. Free energy and BTG is not a scam. People are manipulated on the Internet, on all sorts of sites for electricians and electronics engineers, as if authoritatively declaring that BTG is a scam. It’s just that people on these sites are not able to go beyond the school-institute program. Free energy existed back in the 19th century until it was destroyed so that we could buy gasoline and electricity. BTG is not a scam, but you can’t buy a generator for 10 thousand rubles, and even for 100 thousand it’s difficult.

On the forums free energy Chip's BTG has been discussed for several years now. There is also a video of this in action online. fuel-free generator. The video is not fake - Chip's generator really worked. However, attempts to repeat the scheme, as always, did not lead to the desired results. The designs do not work either for replicators or for the Chip itself. What is the problem? The problem is a simple misunderstanding of the processes that occur in the generator and what generally happens in the circuit. Chip held several long boring conferences from which there was no informational benefit. What he explained and drew has nothing to do with free energy. The same applies to other authors: Akula, Kulabukhov, Vasmus, etc. People accidentally fall for the effect. This effect is not stable and cannot be repeated. The theoretical reflections of the authors are very far from real processes.

Fuel-free generator(BTG) on ferrite using non-collinear magnetic structures produces surplus energy due to the magnetic-electric effect. The essence of the effect is that a magnetic field creates an electric field in ferrite, and an electric field reversibly creates a magnetic field. To create a non-collinear structure, ferrite is introduced into magnetostrictive resonance. It is believed that magnetostriction is not a superunit process, however, with the proper approach to design, it is quite possible to create generator with a power increase factor of 4-5, which is enough to self-power the BTG and power a load with a power of up to 50 W when using a rod with a diameter of 8 mm. The power can be increased by using several identical rods in parallel or a rod of a larger diameter. An overview diagram of the generator is shown in the figure.

Ruslan Kulabukhov's BTG is remarkable for the absence of arresters. It's essentially completely silent generator electricity for household needs. But this advantage is offset by the complexity of the device and the difficulty of setting it up. The author of the development, despite obvious efforts, has still not been able to give an acceptable description of the operating principle. Scheme generator Kulabukhova is given below. The circuit may vary depending on the components used, but the essence of the generator’s operation does not change. The BTG includes a low-frequency push-pull part and a high-frequency cacher part. Many experimenters tried to “revive” this BTG, but only a few succeeded. The problem is not in the scheme, but in understanding the principle of receiving an increase. Kulabukhov’s generator begins with the essence of understanding the processes that occur in the “pot” and “pomegranate”.

Fuel-free generator(BTG) can be made from a power transformer, or rather on a core made of transformer steel. All factory windings will have to be removed and your own wound. However, you won’t have to roll around much, which is good news. The BTG works by core atomic precession (NMR) and ferroresonance. Each core has its own frequency, which is in the range of several tens of kilohertz. Generator can be assembled on a ferrite core, but the ferrite is gradually destroyed. Transformer steel, unlike ferrite, has fairly high ductility and operates without restrictions. A manual is offered with a BTG diagram and a description of the operating principle for independent production with your own hands and head. Among the advantages of the generator: not too large dimensions with good power and the absence of grounding.

Fuel-free generator Khmelevsky on pulse transformer from an old color TV. Generator produced in a small series for geologists. Khmelevsky's generator is an excellent example of the forgetfulness of humanity. Some 30 years ago, geologists carried a real BTG in their backpacks, without thinking at all about the originality of the device. At the same time, crowds of non-believers on all forums demand to be shown the current BTG and categorically refuse to believe in the possibility of violating the law of conservation energy. The history of the generator is such that the author, despite producing, actually working generators, refused to accept the application to the patent office. The production itself was curtailed because the product was not in demand - every gram of weight in a geologist’s backpack is strictly limited, so geologists used various pretexts to get rid of generators.

Fuel-free generator FE-5000 for home use as a stand-alone source electricity. Generator does not contain moving parts and has an unlimited resource. Assembled in a case from the computer system unit. Main characteristics: Output voltage 220-240 Volts 50 Hz, pure sine Maximum output power 5 kW Nominal output power 3.5 kW Weight 8 kg Overall dimensions 450x400x180 mm The generator must be grounded according to standard requirements for household electrical appliances. Warranty: In the event of a breakdown, the generator is sent to the author of the development for repair. If the generator housing is opened by the consumer, no repairs will be made. SOLD! Orders are not accepted.

Fuel-free small power station for domestic needs FE-200 is free energy generator. The power plant does not consume any fuel, but produces more than 200 W of useful power. Mini power station FE-200 is a unique product that produces energy"out of nothing", despite the popular belief that this is impossible. Actually possible. In this case, the laws of physics are not violated, but on the contrary, they are used properly and taking into account some little-known phenomena. The power plant is intended to replace solar panels in the autonomous power supply system of the house. Unlike solar panels, the power plant operates around the clock, in any weather and practically does not require any maintenance. This power plant is an intelligent handmade product.

A guide to building a high-efficiency DIY home atmospheric power plant. The continuous power of the power plant reaches 500 W. Nowadays it is believed that the atmosphere cannot provide enough energy, but this is a mistaken opinion. Atmospheric energy have been used for a long time and successfully, for which there is a lot of evidence (see photo above). In the 18th and 19th centuries, atmospheric energy was used for lighting and even for heating rooms. Now few people know about this. The use of the atmosphere as an alternative source of electric current is discussed in dozens of patents and many articles. The problem is that it is difficult to apply what is described at home. Launching a balloon a hundred meters or building a high mast is too expensive and not very reliable. But you can get by with a small height.